Red Wave Radio

by **Natha** » Fri, 24 Apr 1998 04:00:00

Hi,
anyone worked out the pin out connection for this radio yet?
--
Nathan
http://www.hullnet.demon.co.uk

by **Frank Ca** » Sat, 25 Apr 1998 04:00:00

On Thu, 23 Apr 1998 20:16:37 +0100, Nathan

>Hi,
>anyone worked out the pin out connection for this radio yet?

Hiya Nathan,

I posted the same question a few weeks ago and got an
answer from John McLellan who kindly informed me that
the pin-outs are as follows....

1 Mic
2 Rx
3 Tx
4 Up/Down
5 Ground
6 8 Volts

My friend wired his Sadelta to his Maycom using Johns
pin-out information and it worked 100%. The only difference
that my friend found was that he measured 13 volts on
pin 6 instead of 8?.

Hope that helps Nathan.

73's

Frank Carr

http://vzone.***.net/frank.carr/

by **Simon J** » Mon, 27 Apr 1998 04:00:00

Quote:>I posted the same question a few weeks ago and got an
>answer from John McLellan who kindly informed me that
>the pin-outs are as follows....

>1 Mic
>2 Rx
>3 Tx
>4 Up/Down
>5 Ground
>6 8 Volts

>My friend wired his Sadelta to his Maycom using Johns
>pin-out information and it worked 100%. The only difference
>that my friend found was that he measured 13 volts on
>pin 6 instead of 8?.

Has anyone worked out any mods for this radio yet? My friend has got one
and we noticed that when you do a reset on the radio the LCD shows all
the symbols on the screen which include band letters A-F (I think) and
also repeater shifts and DTMF indicators. I would imagine that the
microprocessor is set to restrict to UK and EU bands but may be possible
to open up coverage, a little like the popular Alan 78, 48 and 95
radios.

--
Simon JD, East Yorkshire, UK

by **Natha** » Mon, 27 Apr 1998 04:00:00

>On Thu, 23 Apr 1998 20:16:37 +0100, Nathan

>>Hi,
>>anyone worked out the pin out connection for this radio yet?

>Hiya Nathan,

>I posted the same question a few weeks ago and got an
>answer from John McLellan who kindly informed me that
>the pin-outs are as follows....

>1 Mic
>2 Rx
>3 Tx
>4 Up/Down
>5 Ground
>6 8 Volts

>My friend wired his Sadelta to his Maycom using Johns
>pin-out information and it worked 100%. The only difference
>that my friend found was that he measured 13 volts on
>pin 6 instead of 8?.

>Hope that helps Nathan.

>73's

>Frank Carr

>http://vzone.***.net/frank.carr/

Thanks, Frank, that's coolerama!
--
Nathan

Red Wave Radio

Maycom EM27 UK UK UK

Maycom EM27 UK UK UK

Maycom EM27 UK UK UK

Maycom EM27 UK UK UK

Maycom EM27 UK UK UK