by Alex Schapir » Fri, 07 Mar 1997 04:00:00
I'm looking for the above mentioned electrolytic cap to restore a
Hallicrafters S-53A receiver. Its an aluminum can (twist tab mounting),
1 3/8" dia, 3" tall.
I know quad section caps at 350 V are rare, so I'll settle for the
one with first three sections.
Also, The measured voltage is only about 250 volts, so perhaps a 300
volt cap would work. What do you think? Thanks.
-Al
by Francois Gibou » Sat, 08 Mar 1997 04:00:00
^^^^^^^^^^^^^^^^^^^^^^Quote:> I'm looking for the above mentioned electrolytic cap to restore a
> Hallicrafters S-53A receiver. Its an aluminum can (twist tab mounting),
> 1 3/8" dia, 3" tall.
> I know quad section caps at 350 V are rare, so I'll settle for the
> one with first three sections.
> Also, The measured voltage is only about 250 volts, so perhaps a 300
> volt cap would work. What do you think? Thanks.
by John S. Freit » Fri, 14 Mar 1997 04:00:00
J. Freitag
--
The opinions herein are those of the author and not any official policy of the University of Rhode Island
1. Need 50-10-10-10 uF @ 350/350/350/25 V Cap
2. LAST DAY**COMET CHL-350 10 & 6 METER ANT
3. COMET CHL-350 10 & 6 METER ANT
4. FS Palamor 350 HD 10 meter amp $125
5. FA:COMET CHL-350 10 & 6 METER ANT
6. Re. Fs mavrick xl 350 is a varmit xl 350 SORRY MY MISTAKE
7. FS 350' Andrew LDF 6-50 Hardline
8. F.S. Bearcat 350 [ 50 channel ]
9. F.S. Bearcat 350 [ 50 channel ] $ 55.00
10. F.S. Bearcat 350 50 Channel
11. FT: My Kenwood TK-350, your Yaesu FT-50?