Red Wave Radio

by st » Thu, 14 Sep 2000 04:03:33

Anyone have some IC-R2 programming software for Windows 2000? The stuff
from icom doesn't seem to work, get's about half way downloading then says
"Recieve error, try again" and the software on butel.nl finished downloading
but when it's complete in says "Device Unavailable" and exits the program.
Both programs seem to work fine with my windows 98 laptop and swapping
cables from home-made to icom supplied didn't change anything. Thanks!

st at reticent dot net

by **Bill Crocke** » Thu, 14 Sep 2000 06:13:03

Make sure your COM ports are setup in CMOS/BIOS with their true address, and
IRQ's! Plug'n'Play automatic settings can confuse DOS programs. If that
doesn't help, try disabling the FiFo buffering on your COM port in
Win2k...see if that helps.

Bill Crocker

Quote:> Anyone have some IC-R2 programming software for Windows 2000? The stuff
> from icom doesn't seem to work, get's about half way downloading then says
> "Recieve error, try again" and the software on butel.nl finished
downloading
> but when it's complete in says "Device Unavailable" and exits the program.
> Both programs seem to work fine with my windows 98 laptop and swapping
> cables from home-made to icom supplied didn't change anything. Thanks!

> st at reticent dot net

by GB » Thu, 14 Sep 2000 06:36:01

ARC2 will support NT4 and NT2000 soon. The problems with NT4 are fixed and
we will release a new version within 2 weeks that supports NT4. NT2000 will
be supported soon but requires more testing over here.
The problem you reported looks simular to the problems that were reported
under NT4.

Win.ME should be no problem with current version, according to one of our
reg.users but for the moment we do not support ME until we checked it
ourselves.

Gommert Buysen
BuTel Software - The Netherlands
http://www.butel.nl

Quote:> Anyone have some IC-R2 programming software for Windows 2000? The stuff
> from icom doesn't seem to work, get's about half way downloading then says
> "Recieve error, try again" and the software on butel.nl finished
downloading
> but when it's complete in says "Device Unavailable" and exits the program.
> Both programs seem to work fine with my windows 98 laptop and swapping
> cables from home-made to icom supplied didn't change anything. Thanks!

> st at reticent dot net

by **Len** » Fri, 29 Sep 2000 11:03:46

use windows se version

Quote:> Anyone have some IC-R2 programming software for Windows 2000? The stuff
> from icom doesn't seem to work, get's about half way downloading then says
> "Recieve error, try again" and the software on butel.nl finished
downloading
> but when it's complete in says "Device Unavailable" and exits the program.
> Both programs seem to work fine with my windows 98 laptop and swapping
> cables from home-made to icom supplied didn't change anything. Thanks!

> st at reticent dot net

by st » Fri, 29 Sep 2000 11:24:46

Windows SE? I think you mean ME. There are lots of reason I don't use
Windows ME but I'm not going to get into a debate about which OS is better
because that's not the point, and the problem with butel's software has been
fixed.

> use windows se version

> > Anyone have some IC-R2 programming software for Windows 2000? The stuff
> > from icom doesn't seem to work, get's about half way downloading then
says
> > "Recieve error, try again" and the software on butel.nl finished
> downloading
> > but when it's complete in says "Device Unavailable" and exits the
program.
> > Both programs seem to work fine with my windows 98 laptop and swapping
> > cables from home-made to icom supplied didn't change anything. Thanks!

> > st at reticent dot net

by **William W. Josli** » Fri, 29 Sep 2000 11:27:15

SE=Second edition (98)

> Windows SE? I think you mean ME. There are lots of reason I don't use
> Windows ME but I'm not going to get into a debate about which OS is better
> because that's not the point, and the problem with butel's software has
been
> fixed.

> > use windows se version

> > > Anyone have some IC-R2 programming software for Windows 2000? The
stuff
> > > from icom doesn't seem to work, get's about half way downloading then
> says
> > > "Recieve error, try again" and the software on butel.nl finished
> > downloading
> > > but when it's complete in says "Device Unavailable" and exits the
> program.
> > > Both programs seem to work fine with my windows 98 laptop and swapping
> > > cables from home-made to icom supplied didn't change anything.
Thanks!

> > > st at reticent dot net

Red Wave Radio

IC-R2 software for windows 2000

IC-R2 software for windows 2000

IC-R2 software for windows 2000

IC-R2 software for windows 2000

IC-R2 software for windows 2000

IC-R2 software for windows 2000

IC-R2 software for windows 2000