Contact www.scannermaster.com and go to the "store" they offerQuote:> I would be willing to ship it and pay any costs involved it is just
> too confusing for me but it is trunked and I can't make it work right
> any help would be much appreciated
If you get the winscan 780 program, I believe he can program all the freqs,
then just Email you the file. Load the file into the program, connect to
your scanner, and Viola' everything is done.
I also find it difficult to program my 780, but what I did, was buy one of
the 780 software programs, plug in all the freqs, and then send it to the
radio. I found it much easier, in fact, I haven't even read the manual for
my 780 yet. Most of the programs I have used (winscan780, scanpro,
trunkstar) all have the function of entering a freq, then using a pulldown
menu, you can select trunked, or conventional, Edacs, and so forth. So, if
you choose not to go the scanner master route, try the trunkstar 15 day
trial, and see if it works for you. Of course you need a 9 pin serial
cable, that either you can get from radio shack, or if you buy some
programs, the cable comes with.
Sorry for the run on sentences.
If you need more help, feel free to Email me.
Hope that helped,
12. Bearcat 780XLT