Later BC-200XLT Cell Mod?

Later BC-200XLT Cell Mod?

Post by Leigh Marrin/KM6 » Thu, 06 Aug 1998 04:00:00

I recently bought a used BC-200XLT scanner.  It's the later version with
the UC-1147A microprocessor.  I understand the cell mod for the later
version is different, and I found the following mod:

Quote:>The newer Bearcat 200XLT modification involves ADDING any 2.2K through
>10K ohm 1/8 or 1/4 (1/8 works better cause its smaller) resistor
>between pin 8 the K1019 IC and the LEFT side of the 10K resistor that
>is right above the UNIDEN UC-1147A microprocessor.

Problem:  I can find the 10K resistor mentioned, but I can't find the
K1019 IC.  (But it does have two K1013 ICs.)  Where is K1019?

Thanks in advance.  --Leigh Marrin/KM6JE in Santa Barbara, Calif.