Reset on Pro-93 Scanner?

Reset on Pro-93 Scanner?

Post by jon » Fri, 09 Nov 2007 13:58:04

Greetings All!
I have a friend that has a Pro-93 scanner that is not acting
correctly.  He has no manual for it and I am wondering if there is a
reset for this radio.  Thanks in advance for any help!  Jon in Upstate
South Carolina.
 
 
 

Reset on Pro-93 Scanner?

Post by John Sheatsle » Fri, 09 Nov 2007 22:49:07



> Greetings All!
> I have a friend that has a Pro-93 scanner that is not acting
> correctly.  He has no manual for it and I am wondering if there is a
> reset for this radio.  Thanks in advance for any help!  Jon in Upstate
> South Carolina.

On-line owner's manual at:
http://support.radioshack.com/support_electronics/doc66/66173.pdf

According to it there is a reset opening on side.  Turn off the scanner,
then turn it on.  Insert the obligatory straightened paper clip and
press the reset button therein.

Regards,
Johhn

 
 
 

Reset on Pro-93 Scanner?

Post by cuhu.. » Sat, 10 Nov 2007 12:34:50

I own a Pro 91 scanner.Is there a reset for that one?
cuhulin
 
 
 

Reset on Pro-93 Scanner?

Post by B! » Sat, 10 Nov 2007 15:55:50


>I own a Pro 91 scanner.Is there a reset for that one?

You could have found the manual on the same site. 'While holding down
keys 2 and 9, turn on the scanner. CLEAR flashes for about 8 seconds
as the scanner clears its memory'.

http://www.redwaveradio.com/

--
This is the Panic Office, section nine-seven*** may have been hit.
Activate the following procedure.