Red Wave Radio

by **Jeffrey L. Baum** » Mon, 06 May 1996 04:00:00

Anyone seen any articles and/or circuits for a 100hz tone
generator I can use with some older 2 meter gear to access
some local repeaters?

Jeff
WB5KZW
Near Detroit
(810) 788-3210

Thanks!
--

by **Dave Maciorowsk** » Mon, 06 May 1996 04:00:00

Quote:
>Anyone seen any articles and/or circuits for a 100hz tone
>generator I can use with some older 2 meter gear to access
>some local repeaters?

>Jeff
>WB5KZW
>Near Detroit
>(810) 788-3210

>Thanks!
>--

I'd go down to the radio store and get a Communications Specialists
SS-32 encode-only CTCSS encoder. The frequencies are dip-switch
selectable.

I have built my own CTCSS encoders in the past, but the 1%
resistors are usually hard to track down -- stability of CTCSS
tones if VERY important because they should be accurate and
stable to a tenth of a Hertz, 100.0 Hz in your case.

-----
Dave Maciorowski, WA1JHK
Colorado Repeater Association, Inc.
Serving Colorado with Voice and Data, 6-Meters to 1.2 Gig

CRA: http://www.rmsd.com/hamradio/cra/

Red Wave Radio

100HZ Tone Generator info for repeater access?

100HZ Tone Generator info for repeater access?

100HZ Tone Generator info for repeater access?